Author: Domenick Naccarato
-
A Sprocket Tethered Between Two Bearings
24″ x 24″ | rust, paint, wax, and other materials on steel | SOLD archive #201406
-
-
-
Showing work at Capital Blue Store
Over the next two months a few of my paintings will be on display in the Capital Blue store at the Promenade Shops in Center Valley, PA. They have a running artist series over there where they showcase the work of local and regional artists in and around the Lehigh Valley. This will mark the first solo showing…
-
Markings: Seventy Two
25″ x 25″ | rust, paint, tar, bolts and other materials on steel | SOLD archive #201403 This is another piece in my ongoing attempts to make some of my artwork look like I found it on the side of an industrial building or train box car.
-
Markings: A070606 & C101312
24″ x 12″ each | mixed media on steel | commission archive #201401 and #201402 This diptych is the start of a new series of work I am creating on steel. Most of the reds and browns in these two pieces are the result of rusting techniques that I am applying to the steel in an…
-
Starting off the New Year with a new Facebook page
This week I finally set up a Facebook page for my art. I plan on posting studio updates, works in progress, and other various announcements regarding any shows or events I’m taking part in. Head on over to Facebook and search for “Art by Domenick Naccarato” or just click the image below to like my…
-
Three White Marks Above Green
13″ x 10.5″ | encaustic and mixed media on panel | SOLD archive #201337
-
Mending Plate Tethered To Three Bolts
12″ x 9″ | encaustic and mixed media on panel | SOLD archive #201336
-
-
-
Showing Art at Connexions Annual Holiday Show
I’m excited to announce that I’m showing my artwork these next two months at CONNEXIONS gallery in Easton, PA as part of their 2013 Annual Holiday Show. The gallery is located in downtown Easton and is home to a varied collection of artists and artisans from in and around the Lehigh Valley. I’m extremely honored…
-
Wall Segments No.14 – 679150
48″ x 36″ | mixed media with assemblage on plywood | $1500 archive #201331
-
-
Two Square Cut Nails with Copper Wire
13″ x 10.5″ | encaustic, mixed media, and assemblage on panel | $150 archive #201333
-
Opening Reception of 78th Annual Lehigh Art Alliance Fall Juried Show
Here’s a shot looking down the hallway at the opening reception of the Lehigh Art Alliance 78th Annual Fall Juried Art show. In the foreground on the left is one of my fellow New Bridge artists James A. DePietro. The show is being hosted in the Siegel Gallery at Lehigh University and runs until December 13th, 2013.…
-
Artist Talk – Carlos Runcie-Tanaka
At this evening’s ACE meeting we were treated to a lecture by Peruvian born artist Carlos Runcie-Tanake. He walked us through a slide presentation of his impressive body of work to date and told us some stories on how much of it came to be. His career as an artist began as a ceramicist but…
-
-
Wall Segments No.12 – 03022004
49″ x 49″ | mixed media with assemblage on plywood | $1800 archive #201329
-
Three Pipe Hangers with a Mending Plate
28″ x 20″ | mixed media with assemblage on wafer board | SOLD archive #201328
-
Riverside Arts Festival Recap
Had a great turnout this weekend at the art festival in Easton. I want to send out a thank you to all my family and friends who came out to visit, help set up, and take down. You are awesome! I was lucky enough to be near some of my new artist friends including Ana Hamilton, Yevette Hendler, and Michelle…
-
Update on September Happenings
I have a number of updates I wanted to publish here so I thought to list them all in a single post. Tomorrow, Saturday the 21st, is the first day of the two day Riverside Arts Festival in Easton, PA. I’m very excited, as it marks the first time I’ve taken part in something like…
-
Cast Iron Floor Grate
28″ x 22″ x 2″ | mixed media with assemblage on wafer board | $525 archive #201326
-
A Washer Tethered Between Two Brackets
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201325
-
Emergency Fuel Cut Off
28″ x 22″ x 2″ | mixed media with assemblage on wafer board | SOLD archive #201327
-
-
Mending Plate with Grate Imprint
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201323
-
Insert Into Pipe Flange
15″ x 11″ x 1.5″ | mixed media with assemblage on panel | SOLD archive #201322
-
-
The New Bridge Duets Show
The New Bridge Group of Allentown, PA is putting on an upcoming collaborative show pairing visual artists with writers, poets, and musicians. The idea is to draw inspiration from a visual piece of art and have those individuals respond to it in their own way. I’m still looking for someone to pair up with, but…
-
DIY Gridwall for Art Fair Tent
I needed a way to hang my paintings within the space of my tent at the upcoming Riverside Festival of the Arts. Instead of buying gridwall panels I decided to make my own. My version of gridwall is a 48″ wide by 84″ tall panel with 6″x12″ grid spacing. Here’s how I did it… You…
-
My First Art Festival and How I Plan to Set up the Display
It’s official! I will be showing work at the upcoming Riverside Festival of the Arts in Easton, PA. I’ve been checking the website every so often over the past week and finally saw my name on the list, along with about 60 other artists from around the region. The festival takes place on Saturday and Sunday,…
-
Riverside Festival Artist Submission
Below are three images of my work for the ACE Riverside Festival of the Arts artist submission. The fourth image is a display setup example. Please contact me at domenick.naccarato@gmail.com if there are any questions.
-
ACE Tent at the Easton Farmers Market
Today I spent the morning showing some of my art in the ACE tent at the Easton Farmers Market. This past year I joined the ACE group (Arts Community of Easton) and as part of their ongoing efforts to support art and artists in the area, they’ve teamed up with the Easton Farmers Market to…
-
-
-
Pull Here
24″ x 24″ | mixed media on plywood | SOLD archive #201318 If you’re interested in reading about how this painting was created, view my blog post that covers highlights of the process.
-
Highlights of the Process for Making ‘Pull Here’
Lately, most all of my paintings start with an object or set of objects that I use to form the basis of the piece. In the case of ‘Pull Here‘, it started with this- a door pull from Home Depot: This grabbed my attention and I immediately saw it in use with some markings or…
-
-
